-25%

Rode NT1 STUDIO MICROPHONE KIT

R7,795 R5,845

Although the body of the new NT1 closely resembles the NT1-A, the microphone has been completely redesigned from the ground up, with the only shared component being the mesh grille.

being comparable to some of the toppling vintage microphones this is a must have in any studio.



NOW YOU CAN ORDER DIRECT FROM OUR STORES OR WAREHOUSE!
These are the locations you can ship from:
  • SHIP FROM WAREHOUSE: 1 in stock
  • WESTERN CAPE, Claremont store: 1 in stock
  • WESTERN CAPE, Table View store: 1 in stock

Description

Acoustic Principle Pressure Gradient
Active Electronics JFET impedance converter with bipolar output buffer
Capsule 1.00″
Polar Pattern Cardioid
Address Type Side
Frequency Range 20Hz – 20kHz
Output Impedance 100?
Maximum SPL 132dB SPL (@ 1kHz, 1% THD into 1K? load)
Maximum Output Level 8.0dBu (@ 1kHz, 1% THD into 1K? load)
Sensitivity -29.0dB re 1 Volt/Pascal (35.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 4dB-A
Power Options +48V phantom power+24V phantom power
Weight 440.00gm
Dimensions 187.00mmH x 50.00mmW x 50.00mmD
Output XLR Output
Warranty 1 year with free extension to 10 years following registration here

Acoustic Principle Pressure Gradient
Active Electronics JFET impedance converter with bipolar output buffer
Capsule 1.00″
Polar Pattern Cardioid
Address Type Side
Frequency Range 20Hz – 20kHz
Output Impedance 100?
Maximum SPL 132dB SPL (@ 1kHz, 1% THD into 1K? load)
Maximum Output Level 8.0dBu (@ 1kHz, 1% THD into 1K? load)
Sensitivity -29.0dB re 1 Volt/Pascal (35.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 4dB-A
Power Options +48V phantom power+24V phantom power
Weight 440.00gm
Dimensions 187.00mmH x 50.00mmW x 50.00mmD
Output XLR Output
Warranty 1 year with free extension to 10 years following registration here

Acoustic Principle Pressure Gradient
Active Electronics JFET impedance converter with bipolar output buffer
Capsule 1.00″
Polar Pattern Cardioid
Address Type Side
Frequency Range 20Hz – 20kHz
Output Impedance 100?
Maximum SPL 132dB SPL (@ 1kHz, 1% THD into 1K? load)
Maximum Output Level 8.0dBu (@ 1kHz, 1% THD into 1K? load)
Sensitivity -29.0dB re 1 Volt/Pascal (35.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 4dB-A
Power Options +48V phantom power+24V phantom power
Weight 440.00gm
Dimensions 187.00mmH x 50.00mmW x 50.00mmD
Output XLR Output
Warranty 1 year with free extension to 10 years following registration here

Additional information

Weight 3 kg