Rode NTG-1 Directional Condenser Microphone

R5,965FREE DELIVERY

The RØDE NTG1 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (105gm/3.7oz) makes it an ideal boom microphone.

36 in stock

NOW YOU CAN ORDER DIRECT FROM OUR STORES OR WAREHOUSE!
These are the locations you can ship from:
  • SHIP FROM WAREHOUSE (Fastest): 30 in stock
  • WESTERN CAPE, Plumstead store: 1 in stock
  • WESTERN CAPE, N1 City Value Centre store: 1 in stock
  • WESTERN CAPE, Claremont store: 1 in stock
  • WESTERN CAPE, Table View store: 1 in stock
  • KWAZULU NATAL, Durban store: 1 in stock
  • GAUTENG, West Rand store: 1 in stock
    FloatOr as low as R1,491 / month interest-free, using your existing credit card. For orders over R1,000.How it works

    Description

    In addition to the native 20Hz-20kHz frequency response, a selectable high-pass filter at 80Hz is available, which will prevent low-end noise such as air conditioners and traffic from being recorded.

    The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional ‘DeadCat’ furry is recommended for outdoor applications.

    The RØDE NTG1 shotgun microphone is designed and made in Australia, and covered by RØDE Microphones’ industry-leading 10-year warranty.

    • Broadcast sound quality
    • Low noise circuitry
    • Super-cardioid polar pattern
    • Condenser transducer
    • Rugged metal construction
    • Two step High Pass Filter (Flat/80Hz)
    • Low handling noise
    • Low weight – 105g (3 oz.)
    • Includes mic clip, wind shield and zip case
    • Ideal for professional applications within the film, video, television and production industries
    • 10 year extended warranty when you register your microphone

    Specs

    Acoustic Principle Line Gradient
    Active Electronics JFET impedance convertor with bipolar output buffer
    Capsule 0.50″
    Polar Pattern Supercardioid
    Address Type End
    Frequency Range 20Hz – 20kHz
    Output Impedance 50Ω
    Maximum SPL 139dBSPL
    Maximum Output Level 6.9mV (@ 1kHz, 1% THD into 1KΩ load)
    Sensitivity -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
    Equivalent Noise Level (A-weighted) 18dBA
    Power Options +24V phantom power+48V phantom power
    Weight 105.00g
    Dimensions 219.00mmH x 22.00mmW x 22.00mmD
    Output XLR Output
    Warranty 1 year with free extension to 10 years following registration here