Request Stock

Markbass LIttle Mark Tube 800 Bass Amp Head

R13,720FREE DELIVERY

The Little Mark Tube solves the “tube or solid state” dilemma. The Little Mark Tube 800 goes a step further by also addressing that other perennial concern, “Will I have enough power?”

Out of stock

SKU: LMTUBE800 Categories: , Tag: Brand:
FloatOr as low as R3,430 / month interest-free, using your existing credit card. For orders over R1,000.How it works

Join the waitlist to be emailed when this product becomes available and confirm the price

Description

The 800 watts from this powerful amp will satisfy any thirst for power, and the two blendable preamps give you the warmth and richness of a tube preamp, the clean attack of a solid state preamp… or a mix of both!

Power to the Max

The 800 watts from this powerful bass amp will satisfy any thirst for power, and the two bendable preamps give you the warmth and richness of a tube preamp, the clean attack of a solid state preamp, or a mix of both. The Markbass head features a mix control for mixing between solid state and tube. The result offers a range of sounds, from the crisp sound in the solid state, to a full, heavy tube sound in the tube state, as well as anything in between.

Take Control

On the front panel there are two inputs with separate gain controls: one 1/4″ jack, and one combo jack that accepts either an XLR or 1/4″. The Vintage Loudspeaker Emulator (VLE) and Variable Preshape Filter (VPF) allow access to a wide array of timbres, from classic tones to modern hi-fi sound. The Little Mark Tube 800’s phantom power switch accompanies the XLR input, for using a microphone on a double bass. Mute control is as simple as a push and a pull on the master volume switch. Additional features include four bands of equalization, line out control, and pre-post EQ switch for the XLR out (on the rear panel).

Specs

INPUTS

  • INPUT 1: impedance 500 Kohm, max. voltage 15 Vpp
  • INPUT 2: (Balanced XLR/1/4″ combo)
  • BALANCED: impedance 500 Kohm, max. voltage 15 Vpp, phantom power 48V
  • EFFECT RETURN: impedance 33 Kohm, max. voltage 10 Vpp

CONTROLS

  • GAIN 1: -60 dB to +23 dB range
  • GAIN 2: -60 dB to +23 dB range
  • MIX: mixes tube and solid state gain
  • MASTER VOLUME 
  • LINE OUT LEVEL 
  • GROUND LIFT (switch on rear panel)
  • PRE/POST EQ  (switch on rear panel)
  • MUTE (push/pull on master knob)
  • PHANTOM POWER switch (on INPUT 2 / Balanced)

EQUALIZATION

  • LOW: center frequency 40 Hz; level: ±16 dB
  • LOW MID: center frequency 360 Hz, level: ±16 dB
  • HIGH MID: center frequency 800 Hz, level: ±16 dB
  • HIGH: center frequency 10 kHz, level: ±16 dB
  • VPF (Variable Pre-shape Filter) center frequency 380 Hz
  • VLE (Vintage Loudspeaker Emulator) frequency range 250 Hz-20 kHz

OUTPUTS

  • LINE OUT: balanced XLR, max. voltage 20 Vpp
  • EFFECT SEND: unbalanced, max. voltage 20 Vpp (pre-EQ)
  • TUNER OUT: unbalanced, max. voltage 2 Vpp
  • SPEAKER OUT: speakon/1/4″ combo, 1/4″

OTHER

  • WEIGHT: 6.61 lbs / 3 Kg
  • WIDTH: 10.87 in. / 27.6 cm
  • DEPTH: 9.84 in. / 25 cm
  • HEIGHT: 3.27 in. / 8.3 cm
  • OUTPUT POWER: 800W RMS @ 4 ohms / 500W RMS @ 8 ohms
  • POWER REQUIREMENT: 100/120V; 230V; 240V – 50/60Hz (Voltage is factory preset according to region of sale)

Minimum ohm load for all Markbass heads is 4 ohms.
Markbass amps/combos are manufactured to be sold and used in the country of purchase, and they are factory preset to that country’s voltage. Due to homologation issues, the voltage may not be changed.
Rack ears do not come included with this head.
Product specifications are subject to change without notice.

Related products